Tampering - Speco H6HRN User Manual

Alarm Management
Object Detection Alarm Handling Configuration:
Click Start→Settings→Alarm→Intelligence Alarm→Object Detection to go to the following interface.
①
Enable or disable "Snapshot", "Push", "Alarm-out", "Preset", "Buzzer", "Pop-up Video" and "E-mail". The
②
alarm handling setting of object detection alarm is similar to that of the sensor alarm (see
details).
Click "Apply" to save the settings. You can click "Object Config" to go to the object detection configuration
③
interface.

9.3.2 Tampering

Tampering Configuration:
Click Start→Settings→Camera→Intelligent Analytics→Tampering to go to the following interface.
①
Select the camera and enable the relevant detection as needed.
②
Scene Change: Alarms will be triggered if the scene of the monitor video has changed.
Video Blurred: Alarms will be triggered if the video becomes blurry.
Video Color Cast: Alarms will be triggered if the video becomes obscured.
Set the sensitivity of the exception detection.
③
Click "Apply" to save the settings.
④
Click "Processing Mode" to go to the alarm handling configuration interface of exception detection.
⑤
56
DVR User Manual
for
9.1 Sensor Alarm