Live View Introduction
DVR User Manual
➢ Quickly Add
Check the cameras and then click "Add" to add cameras. Click
to edit the camera's IP address,
username and password and so on. Click "Default Password" to set the default username and password of
each camera.
➢ Add Manually
Enter the IP address or domain name (click
in the IP address column to pop up the domain name input
window, enter the domain name of the IPC in the window and then click "OK" button), port, username and
password of the camera and then select the protocol. Click "Test" to test the effectiveness of the input
information and then click "Add" button (you can input one camera's information or above such as IP
address, username and password before clicking "Add" button). Click
to delete the camera. Click
"Default Password" to set the default username and password of each camera.
4.2.2 Edit Camera
Click "Edit Camera" in the setup panel to go to the interface as shown below. Click
to view the live image
of the camera in the popup window. Click
to edit the camera (see Add camera in
for
3.1 Startup Wizard
details). Click
to delete the camera. Click
in the "Operation" header line and then click "Modify IPC
17