Table of Contents
Advertisement
Quick Links
HRL (6/16/24 Channel DVR)
6 Channel Hybrid Digital Video Recorder
H6HRL
4 Configurable Hybrid Channels (TVI or IP) plus 2 IP Channels
H16HRL
16 Channel Hybrid Digital Video Recorder
8 Configurable Hybrid Channels (TVI or IP) plus 8 IP Channels
24 Channel Hybrid Digital Video Recorder
H24HRL
8 Configurable Hybrid Channels (TVI or IP) plus 8 IP Channels, plus 8 TVI Channels
Features and specifications are subject to change, please check
Quick Start Guide
www.specotech.com
Version 1.0
for firmware updates.
Advertisement
Table of Contents
Related Manuals for Speco H6HRL
Summary of Contents for Speco H6HRL
- Page 1 HRL (6/16/24 Channel DVR) Quick Start Guide 6 Channel Hybrid Digital Video Recorder H6HRL 4 Configurable Hybrid Channels (TVI or IP) plus 2 IP Channels H16HRL 16 Channel Hybrid Digital Video Recorder 8 Configurable Hybrid Channels (TVI or IP) plus 8 IP Channels...
- Page 2 Email: techsupport@specotech.com Important Safeguards and Warnings Speco Technologies assumes no liability or responsibility for any fires or electrical shock caused by improper handling or installation. Speco Technologies is not liable for any problems caused by unauthorized modifications or attempted repair.
-
Page 3: Enter A Password
Figure 1-2 (24 channel unit shown) Set Password and Security Questions 2.1 Enter a password Note: You will be prompted to set a Password and security questions upon initial bootup. See Fig 2-1 The default login ID and administrator username is: admin The password strength indicator can be used as a reference. - Page 4 Figure 2-1 Update Firmware (if necessary) Speco will continuously make improvements, please check the website to ensure you are running the latest firmware version. 3.1 Check firmware version on recorder You can click Start→Settings→System→Information→Basic go to “About this machine” and click on “view”. You will then be able to see the firmware version number and build date.
-
Page 5: Updating Firmware
Figure 3-3 If the web has a more recent firmware version than your recorder’s build date, then please update your device to the latest firmware. 3.2 Updating Firmware 1. Copy the upgrade software into the USB storage device. 2. Insert the USB storage device into the USB interface of the DVR. 3. - Page 6 Figure 4 Tip: Check the “Enable EZ setup next time” box to display the EZ Setup wizard every time the device is rebooted. 4.1 General Settings – Date & Time When booting up for the first time, the device will prompt you for time settings or go to Settings→System→Date and Time for Figure 4-1.
-
Page 7: Upnp Configuration
System Time: Set the time and date format of the system DST: Toggle Daylight Saving Time On or Off Time format: Choose between 24-hour mode or 12-hour mode. NTP: Specify an NTP server to synchronize the time (optional). 4.2 EZ Network Setup •... -
Page 8: Ddns Settings
4.4 DDNS Settings The DDNS is used to control the dynamic IP address through domain name. Speco Technologies provides free DDNS service with US-based servers. Click Start→Settings→Network→DDNS to go to the interface as shown below. The default DDNS type will be "specoddns.net". The default domain name will be shown. You can use this for your domain name or input your own. -
Page 9: Disk Settings
Figure 4-2 Click to edit an IP camera as shown on the below left. Input the new IP address, subnet mask, gateway, username and the password of the camera. You can check “Sync to IPC” to modify the IP address of the IP camera via different network segments for being in the same network segment with the DVR. -
Page 10: Record Settings
QR Code. Enable the NAT function in the interface or set it in the network configuration after exiting the wizard (please refer to manual for details). You can scan the QR Code through the Speco Blue App available for iOS and... -
Page 11: Web Browser Access
4.9 Web Browser Access Click Start→Settings→Network→NAT to go to the interface for NAT configuration and check “Enable”. Click “Apply” to save the settings and make note of the QR code number under the QR code. Via Internet Explorer, go to connect.specotech.cloud, input the QR code number, your username and password to login. - Page 12 Figure 4-6 5. EZ Search 2.0 EZ Search- Quickly search an instance using video thumbnails • Click Start→Search and Export→EZ search. There are two view modes: by time and by camera. In the time view mode, a maximum of 64 camera thumbnails can be shown. •...
- Page 13 For detailed operation information, please refer to the user’s manual.