Access Rights - VETRON 5064 Service Manual

04. COMMISSIONING & WELDING
One dongle for identification purposes is included in the scope of delivery of the basis module.
DONGLE 1 = ACCESS RIGHTS, LEVEL 1 (= ADMINISTRATOR):
» Assignment of access rights
» Access to all machine parameters
» Program generation
» Program selection
» Light
DONGLE 2 (OPTIONAL) = ACCESS RIGHTS, LEVEL 2 (= OPERATOR):
» Program selection
» Light
» Wheel change
The administrator has access to all functions and can assign access rights using the respective PC program.
The "VETRON OPERATOR MANAGEMENT" program is stored on the administrator dongle and
functions as follows:
01. Insert DONGLE 1 (Administrator) into the USB slot of the computer.
02. Call up the "VETRON OPERATOR MANAGEMENT" program.
03. Insert further DONGLE into the computer.
04. Enter first name, last name, employee number, as well as the access rights,
and click on SAVE USER DATA.
05. Select a SAVING LOCATION (Dongle) for the authentication file.
To set the access permission, see chapter 05.07. machine parameters 817.

03. ACCESS RIGHTS

02/2021
VETRON 5064 Welding Machine
27