VETRON 5064 Service Manual page 69

EXPLANATION
To choose from: OFF | HEAT| WELDING SPEED. | GAP DIMENSION | PRESSURE
To choose from: OFF | Next Program | Backward
Stepper motor values – specified by the manufacturer
Stepper motor gets the reference point via the sensor on the shaft, stepper motor version
–
Feeding speed when automatic gap measuring
Ultra sonic from amplitude when automatic gap measuring
Power value when automatic gap measuring
Pressure determitation when automatic gap measuring
Start gap when automatic gap measuring
Gap factor at automatic gap measuring
Pedal position, you can adjust it if necessary
Pedal position, you can adjust it if necessary
02/2021
67
VETRON 5064 Welding Machine