Table of Contents
Advertisement
08. ADJUSTMENT
05. HEIGHT MEASURING SYSTEM
-2-2
DISPLAY
» HEIGHT MEASURING SYSTEM
8
9
S
e v c
r i
e
10
02/2021
88
VETRON 5064 Welding Machine
STEP
»
In order to get the wheel down.
»
In order to get the wheel up.
At a space of ENC (Encoder) POSITION ± 0 mm bis -1,00 mm the GREEN DIODE shouldn't glow.
At -1,00 mm STOP TURNING the JOG KEY rightwards!
»
Press to INITIALIZE
»
press and the machine is ready for
operation.
ATTENTION!
To avoid damage to the magnetic stripe there should be a gap between sensor and magnetic stripe.
DESCRIPTION
The wheel should slowly move upwards.
As long as the wheel is moving, both DIODES
have to GLOW. Otherwise, you have to adjust.
(see Step 6)
ENC position initzialize automatically.
Mount the cover again.
4
Advertisement
Table of Contents
