Welding - Manual Intervention During Welding - VETRON 5064 Service Manual

04. COMMISSIONING & WELDING

10. WELDING - MANUAL INTERVENTION DURING WELDING

In principle, all welding programs are defined via the values previously entered into the parameters.
However, during welding you can manually perform the following operations using the center
button on the head module:
» SWITCH ULTRASOUND ON or OFF
» Activate a SECOND POWER STAGE
(e.g., on transitions from thin to thick material and vice versa)
In order to manually WELD INTO THE OTHER DIRECTION, pull the backward welding button.
This function is particularly suited for overwelding at the end of a weld seam.
In order to TRAVEL a distance FORWARD OR BACKWARD WITHOUT ULTRASOUND,
turn the handwheel.
02/2021
34
VETRON 5064 Welding Machine
Manual Welding 2 nd power stage
Backward welding button
Handwheel