Table of Contents
Advertisement
03. COMMISSIONING & WELDING
One dongle for identification purposes is included in the scope of delivery of the basis module.
DONGLE 1 = ACCESS RIGHTS, LEVEL 1 (= ADMINISTRATOR):
» Assignment of access rights
» Access to all machine parameters
» Program generation
» Program selection
DONGLE 2 (OPTIONAL) = ACCESS RIGHTS, LEVEL 2 (= OPERATOR):
» Program selection
The administrator has access to all functions and can assign access rights using the respective PC program.
The "VETRON OPERATOR MANAGEMENT" program is stored on the administrator dongle and
functions as follows:
01. Insert DONGLE 1 (Administrator) into the USB slot of the computer.
02. Call up the "VETRON OPERATOR MANAGEMENT" program.
03. Insert further DONGLE into the computer.
04. Enter first name, last name, employee number, as well as the access rights,
and click on SAVE USER DATA.
05. Select a SAVING LOCATION (Dongle) for the authentication file.
To set the access permission, see page 68 machine parameters 817.
03. ACCESS RIGHTS
02/2021
Vetron 5374 HotAir-Welding
21
Advertisement
Table of Contents
