Table of Contents
Advertisement
Windows NT Installation
This section describes how to install the Harmony 802.11b PC
Card in a computer running Windows NT 4.0.
Follow these steps to install the Harmony 802.11b PC Card:
1.
Insert the Harmony 802.11b PC Card into one of the
computer's PCMCIA slot.
Note:
If you cannot insert the Harmony 802.11b PC Card
into the laptop's PCMCIA slot, contact the laptop's
manufacturer to determine if the laptop supports
3.3-volt PC Cards. Your laptop's PCMCIA slot must
support 3.3 volts in order to use the Harmony 802.11b
PC Card.
2.
Turn on the computer and logon to Windows NT.
3.
Insert the Harmony Installation CD into the computer's
CD-ROM drive.
4.
Double-click the My Computer icon on the Windows
desktop.
5.
Double-click the CD-ROM drive icon (typically this is
drive D:) to browse the Harmony Installation CD.
6.
Double-click the file SETUP.EXE to manually launch the
installation program.
27
Advertisement
Table of Contents
