Note to Customers Who Have a Laptop Without a
CD-ROM Drive
If you are installing a Harmony 802.11b PC Card in a laptop that
does not have a CD-ROM drive, you should follow the steps
below prior to installing the Harmony software:
1.
Confirm that the Windows cabinet (CAB) files are
installed on the computer. The CAB files are typically
located in C:\WINDOWS\OPTIONS\CABS\.
2.
If the computer does not have the CAB files installed, copy
the WIN95 or WIN98 folder, found on the Windows
CD-ROM, to a temporary folder on the computer.
3.
Copy the contents of the Harmony Installation CD-ROM to
a temporary folder on the computer. Alternatively, you
may download the Harmony software from Proxim's Web
site at http://www.proxim.com/support/.
4.
Follow the installation instructions contained in this chap-
ter. When the instructions call for either the Windows CD
or the Harmony Installation CD, direct the installation
wizard to search the temporary folders you created in Steps
#2 and 3 above.
5.
When the installation is complete, remove the temporary
folders you created in Steps #2 and #3 above from the
computer's hard drive.
10