Table of Contents
Advertisement
Most likely, the Harmony 802.11b PC Card is having a resource
conflict with another device that is already using the Interrupt
Request (IRQ) for which the Harmony 802.11b PC Card is
configured.
5.
If the Device Manager reports that the PC Card is conflict-
ing with another device, uncheck the Use automatic
settings box.
6.
Highlight the Interrupt Request entry and click the
<Change Setting...> button.
7.
Scroll through the resource values for Interrupt Request,
until you find an available setting for which No devices are
conflicting, as shown below.
Hint:
You may find that your computer has no free IRQ
available for use. In this case, try setting the IRQ to a
value of 3 or 4, which typically corresponds to COM2
or COM1, respectively. If there is no free IRQ, and you
are actively using both COM1 and COM2 or other
devices are using these resources, then you will need
to remove and uninstall one of the other devices from
the computer before the Harmony 802.11b PC Card
may be used.
54
Advertisement
Table of Contents
