Table of Contents
Advertisement
5.
Highlight the PROXIM Harmony 802.11b/LAN PC
CARD entry and click <Properties>.
6.
Within the Card Setup screen, change the IRQ Level and
I/O Base Address as necessary so the card does not
conflict with other devices.
7.
Click <OK> to close the Card Setup screen and click
<OK> to close the Network icon.
8.
Restart the computer when prompted.
The 802.11b PC Card should now function properly.
Hint:
Generally, the IRQ Level will be the cause of the
resource conflict. You may find that your computer
has no free IRQ available for use. In this case, try
setting the IRQ to a value of 3 or 4, which typically
corresponds to COM2 or COM1, respectively. If there
is no free IRQ, and you are actively using both COM1
and COM2 or other devices are using these resources,
then you will need to remove and uninstall one of the
other devices from the computer before the Harmony
802.11b PC Card may be used.
57
Advertisement
Table of Contents
