Table of Contents
Advertisement
Guidelines for Roaming
A Harmony 802.11b PC Card can only roam between
Harmony 802.11b Access Points. An 802.11b PC Card
cannot communicate with Harmony OpenAir Access
Points.
All Harmony 802.11b Access Points must have the
same SSID.
All workstations with Harmony 802.11b PC Cards must
use either an SSID of "ANY" or the same SSID as the
Access Points that they will roam between.
If WEP encryption is enabled, then all 802.11b Access
Points and PC Cards must use the same encryption level
and Encryption Key to communicate.
The Access Points' cells must overlap to ensure that
there are no gaps in coverage and to ensure that the
roaming client will always have a connection available.
All Access Points in the same vicinity should use a
unique, independent Channel. There are 3 independent
Channels for 802.11b Access Points.
Access Points that use the same Channel should be
installed as far away from each other as possible to
reduce potential interference.
37
Advertisement
Table of Contents
