Metal Core Drilling
Disassembly
Disassembling the intermediate gear box
Steps that must be completed:
-
Removing the intermediate gear box
Tool(s):
-
Arbor press
-
Inner puller
-
Sleeve
60 mm inner diameter, 85 mm outer diameter
-
Punch, 7 mm diameter
-
Assembly aid
1
2
C-SC_CSSM
1.
The grooved ball bearings are destroyed during disassembly
and must be replaced.
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Press out the armature (1).
I
NFORMATION
Remove the three deep groove ball bearings (2).
01.04.2021
34130550060
Printed in Germany
Page 19 of 92