Metal Core Drilling
Disassembly
Disassembling the armature
Steps that must be completed:
-
Disassembling the intermediate gear box
Tool(s):
-
Drawing-off socket cap
-
Chuck cone, 26 mm, 19 mm
1
3
4
5
C-SC_CSSM
2
The grooved ball bearings (2; 5) are destroyed during
disassembly and must be replaced.
1.
2.
3.
4.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
I
NFORMATION
Remove the sealing ring (1).
Remove the grooved ball bearing (2) together with the
sealing ring (3).
Remove the plate (4).
Remove the grooved ball bearing (5).
01.04.2021
34130550060
Printed in Germany
Page 20 of 92