Metal Core Drilling
Disassembly
Disassembling the gearbox parts
Steps that must be completed:
-
Removing the shaft
Tool(s):
-
Circlip pliers
-
Combination pliers
-
Arbor press
-
Sleeve
25 mm inner diameter, 35 mm outer diameter
-
Socket wrench
-
Socket wrench insert, 7 mm
-
Slide hammer
-
Inner puller
-
Slotted screwdriver
-
Punch, 7 mm
1
C-SC_CSSM
1.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the two deep groove ball bearings (1).
01.04.2021
34130550060
Printed in Germany
Page 32 of 92