Table of Contents
Advertisement
Metal Core Drilling
Disassembly
Disassembling the mounting shaft
Steps that must be completed:
-
Removing the mounting shaft
Tools:
-
Circlip pliers
-
Slotted screwdriver
1
2
3
C-SC_CSSM
1.
2.
During disassembly, the sealing ring (3) is destroyed and
needs to be replaced.
3.
4
Energised spring
Injuries can occur.
When loosening the circlip (4), hold the disc (5) with one
5
hand.
4.
6
5.
6.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the circlip (1).
Remove the nut (2).
I
NFORMATION
Remove the sealing ring (3).
C
!
AUTION
Remove the circlip (4).
Remove the disc (5).
Remove the spiral spring with sleeve (6).
01.04.2021
34130550060
Printed in Germany
Page 25 of 92
Advertisement
Table of Contents
