Ska-3D Actions; Creating A Macro; Running A Macro - Christie CineLife+ CP4415-RGB User Manual

SKA-3D actions

The following built-in commands are available for SKA-3D devices:
Command
Set Audio Input Channel
Mute On/Mute Off
Set Master Volume
Set Video Input Channel
Active Trigger Input

Creating a macro

Create a macro to make the projector perform a specific list of actions.
1. In the left navigation menu, select Automation > Macro Editor.
2. In the right pane, select Create New Macro.
3. Type a name for the macro.
The Name field cannot contain spaces.
4. Select the macro type.
5. Select Create.
6. Add an action item to the macro:
a) In the left pane, expand the My Auditorium list.
b) Under Automation or Projector, select the action item.
7. To save the macro, select Save.
8. To test the macro, select Test.

Running a macro

Run a macro to have the projector perform a specific list of actions.
1. In the right toolbar of the touch panel, select Run Macro.
2. Select a macro.
CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4435-RGB, CP4440-RGB, CP4450-RGB, CP2420-Xe, CP4420-Xe
020-103073-06 Rev. 1 (03-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Description
Sets the audio input channel.
Enables or disables muting.
Sets the overall volume for the system.
Sets the video input channel.
Controls eight SKA-3D presets.
To use this command, a trigger input must be associated with each of the SKA-3D
presets
Automation
100