Table of Contents
Advertisement
DT4120 xx xx (PS)
20170324-V0
2. For your safety
2.1. Authorized personnel
All operations described in this operating instructions
manual must be carried out only by trained and authorized
specialist personnel. For safety and warranty reasons, any
internal work on the instruments must be carried out only by
DATCON personnel.
2.2. Appropriate use
DT4120 xx xx (PS) Temperature / Resistance /
Potentiometer Meter-Transmitter enable process
temperature, resistance value or potentiometer wiper
position to be displayed on the control panel.
Detailed information on the application range of the
instrument is available in chapter „Product description".
2.3. Warning about misuse
Inappropriate or incorrect use of the instrument can give rise
to application-specific hazards, or damage to system
components through incorrect mounting or adjustment.
2.4. General safety instructions
The DT4120 xx xx (PS) is a high-tech instrument requiring
the strict observance of standard regulations and
guidelines. The user must take note of the safety
instructions in this operating instructions manual, the
country-specific installation standard as well as all prevailing
safety regulations and accident prevention rules.
2.5. CE conformity
A DT4120 xx xx (PS) is in conformity with the provisions of
the following standards:
EN 61326-1:2006 (EMC)
EN 61010-1:2001 (Safety)
2.6. Environmental instructions
Protection of the environment is one of our most important
duties. Please take note of the instructions written in the
following chapters:
•
Chapter 3.4. Storage and transport
•
Chapter 9.2. Disposal
5
Advertisement
Table of Contents
