Datcon DT4120 Series Operating Instructions Manual page 35

DT4120 xx xx (PS)
Exit from the menu item 1. The instrument exit from this menu item automatically
Exit from the menu
20170324-V0
10. Pressing the ▲ button you you can select:
11. Press the ENTER button. The instrument will store the
wire resistance and you will see:
message.
and you will see on the display:
(2. If you want to change the settings you have done just
now, go on with the operation from point 3 of the Sequence
of operations.)
(3. If you don't want to exit the menu (you want to do further
settings), then you may select the desired menu items by
pressing the ▲ button.)
Press the MENU button. First the mnemonic
then the mnemonic
With this the storing of the settings is completed. The
instrument has exited the menu and goes on with the
measurement.



(Exit) are shown on the display.

.
(Ready = ready)
.

(Save),
35