Table of Contents
Advertisement
DT4220 E
20180619-V0
2. For your safety
2.1. Authorized personnel
All operations described in this operating instructions manual must be
carried out only by trained and authorized specialist personnel. For
safety and warranty reasons, any internal work on the instruments
must be carried out only by DATCON personnel.
2.2. Appropriate use
The DT4220 E Process Indicator enable process variable 0-20 mA, 4-
20 mA, 0-10 V, 0-5 V, 2-10 V to be displayed in engineering units on
the control panel.
Detailed information on the application range of the instrument is
available in chapter "Product description".
2.3. Warning about misuse
Nem megfelelő vagy helytelen használat — alkalmazástól függően —
zavart okozhat a készülékhez kapcsolódó egyéb készülékekben,
rendszerekben.
2.4. General safety instructions
The DT4220 E Process Indicator is a high-tech instrument requiring
the strict observance of standard regulations and guidelines. The user
must take note of the safety instructions in this operating instructions
manual, the country-specific installation standard as well as all
prevailing safety regulations and accident prevention rules.
2.5. CE conformity
A DT4220 E is in conformity with the provisions of the following
standards:
EN 61326-1:2012 (EMC)
2.6. Environmental instructions
Protection of the environment is one of our most important duties.
Please take note of the instructions written in the following chapters:
•
Chapter
3.6. Storage and transport
•
Chapter
9.2. Disposal
5
Advertisement
Table of Contents
