Table of Contents
Advertisement
DT4120 xx xx (PS)
Function
Sequence of operations 1. Enter the menu by the user or the supervisor code.
Exit from the menu item 1. After finishing the settings, press the MENU button to exit
Exit from the menu
20170324-V0
7.3. Display brightness (01. menu item)
The brightness can be set between 10-100%, in 10% steps.
[factory default: 100%]
Chapter 7.1. Typing the code in describes how you can
type the code in.
You see on the display:
2. Enter the given menu item by pressing the ENTER
button.
3. You can read the mnemonic:
brightness). The value 100 is blinking, it signs that it can be
modify.
4. Pressing the ▲ button, select the desired value.
For example: you see on the display:
choosen 50%.
from the given menu item, and you see:
(2. If you want to change the settings you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 2 of the Sequence of
operations.)
(3. If you don't want to exit the menu (you want to do further
settings), then you may select the desired menu items by
pressing the ▲ button.)
1. Press the MENU button. First the mnemonic
(Save), then the mnemonic
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
.(Brightness = brightness)
. (Brightness =
(Exit) are shown on the
. If you have
.
31
Advertisement
Table of Contents
