Datcon DT4120 Series Operating Instructions Manual page 59

DT4120 xx xx (PS)
Exit from the menu item 1. After finishing the setting, press the MENU button, to exit
Exit from the menu
20170324-V0
from the menu item, and you see this:
(2. If you want to change the setting you have performed
just now, or if you just want to check what you have typed
in, continue the operation from Point 3 of the Sequence of
operations.)
(3. If you do not want to exit from the menu, as you want to
perform further settings, you may press the ▲ button to
select the desired menu items.)
Press the MENU button. First the mnemonic
then the mnemonic
With this the storing of the settings is completed. The
instrument has exited the menu and goes on with the
measurement.

(Exit) are shown on the display.

.

(Save),
59