Table of Contents
Advertisement
DT4120 xx xx (PS)
Sequence of operations
Exit from the menu item 1. After finishing the setting, press the MENU button to exit
Exit from the menu
20170324-V0
•
(On = switched on)
It displays the limit output state continuously.
Keeping the ENTER button pressed it displays the
measuring value.
•
(Off = switched off)
There is no limit output display.
Remark:
Independent from the limit output state display mode the
front panel indicators always signal the limit output states.
from the menu item, and you see this:
(2. If you want to change the setting you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 3 of the Sequence of
operations.)
(3. If you don't want to exit the menu, as you want to do
further settings, then you may select the desired menu
items by pressing the ▲ button.)
Press the MENU button. First the mnemonic
then the mnemonic
With this the storing of the settings is completed. The
instrument has exited the menu and goes on with the
measurement.
(Exit) are shown on the display.
.
(Save),
55
Advertisement
Table of Contents
