Table of Contents
Advertisement
Function
Sequence of operation
Exit from menu item
Exit from menu
44
7.9. Rounding displayed value (07. menu item)
In some case it can be useful to round the displayed value.
E.g. the measured physical quantity is noisy.
In this menu item you can select a rounding value.
1. Enter the menu by typing a supervisor code.
The way the code should be type is described in Chapter
7.1. Typing the code in. You see on the display:
2. Keep stepping by pressing the ▲ button as long as you
see this menu item:
3. Enter the menu item by pressing the ENTER button.
4. You see this
indicating that it can be modify.
5. Pressing the ▲ button you can select from the following
options:
•
= no rounding [Factory default]
•
= rounding to 2
•
= rounding to 5
•
= rounding to 10
•
= rounding to 20
•
= rounding to 50
•
= rounding to 100
1. After finishing the settings, press the MENU button to exit
from the given menu item, and you see:
(2. If you want to change the settings you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 3. of the Sequence of
operations.)
(3. If you don't want to exit the menu (you want to do further
settings), then you may select the desired menu items by
pressing the ▲ button.)
Press the MENU button. First the mnemonic
then the mnemonic
With this the storing of the settings is completed. The
instrument has exited the menu and goes on with the
measurement.
(Rounding = rounding).
. on the display. The text is blinking
(Exit) are shown on the display.
DT4120 xx xx (PS)
.
(Save),
20170324-V0
.
Advertisement
Table of Contents
