Table of Contents
Advertisement
DT9000 N
20180614-V0
2. For your safety
2.1. Authorised personnel
All operations described in this operating instructions
manual must be carried out only by trained and authorised
specialist personnel. For safety and warranty reasons, any
internal work on the instruments must be carried out only by
DATCON personnel.
2.2. Appropriate use
The DT9000 N is a 4-20 mA loop-powered process
indicator. Detailed information on the application range of
the DT9000 N is available in chapter „Product description".
2.3. Warning about misuse
Inappropriate or incorrect use of the instrument can give
rise to application-specific hazards, or demage to system
components through incorrect mounting or adjustment.
2.4. General safety instructions
The DT9000 N is a high-tech instrument requiring the strict
observance of standard regulations and guidelines. The
user must take note of the safety instructions in this
operating instructions manual, the country-specific
installation standard as well as all prevailing safety
regulations and accident prevention rules.
2.5. CE conformity
A DT9000 N is in conformity with the provisions of the
following standards:
EN 61326-1:2006 (EMC)
2.6. Environmental instructions
Protection of the environment is one of our most important
duties.
Please take note of the instructions written in the following
chapters:
•
Chapter 3.4. Storage and transport
•
Chapter 9.2. Disposal
5
Advertisement
Table of Contents
