The display
In the case of an error
message
20
6. Display and manual controls
6.1. The first start-up
The display is indicated by the arrow (1)
The factory default setting is:
Pt100 or Pt1000 measurement (depens on the type), 4 wire
connection.
The display of the instrument shows the measured
temperature:
Accordingly, if the temperature is 24.2 degrees centigrade,
the following is shown on the display:
If it is 123.7 °C, then:
If anything else appears on the display instead of the input
temperature (e.g. a message with blinking letters), then it is
an error message of the instrument.
In order to define the error more accurately, please go to
Chapter 6.2..
.
DT4120 xx xx (PS)
.
20170324-V0