Datcon DT4120 Series Operating Instructions Manual page 43

DT4120 xx xx (PS)
Exit from menu item
Exit from menu
20170324-V0
1. After finishing the settings, press the MENU button to exit
from the given menu item, and you see:
(2. If you want to change the settings you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 3. of the Sequence of
operations.)
(3. If you don't want to exit the menu (you want to do further
settings), then you may select the desired menu items by
pressing the ▲ button.)
Press the MENU button. First the mnemonic
then the mnemonic
With this the storing of the settings is completed. The
instrument has exited the menu and goes on with the
measurement.

(Exit) are shown on the display.

.

(Save),
43