Table of Contents
Advertisement
DT1102 V
20230127-V0
2. For your safety
2.1. Authorized personnel
All operations described in this operating instructions manual must be
carried out only by trained and authorized specialist personnel. For
safety and warranty reasons, any internal work on the instruments
must be carried out only by DATCON personnel.
2.2. Appropriate use
The DT1102 V (PS) is a Fully Configurable Galvanic Isolator for
industrial use. Detailed information on the application range is
available in chapter 3. Product description.
2.3. Warning about misuse
Inappropriate or incorrect use of the instrument can give rise to
application-specific hazards, or damage to system components
through incorrect installing or adjustment.
2.4. General safety instructions
Using the DT1102 V (PS) Fully Configurable Galvanic Isolator
requiring the strict observance of standard regulations and guidelines.
The user must take note of the safety instructions in this operating
instructions manual, the country-specific installation standards as well
as all prevailing safety regulations and accident prevention rules.
2.5. CE conformity
The DT1102 V (PS) is in conformity with the provisions of the following
standards:
MSZ EN 61326-1 (EMC)
MSZ EN 61010-1 (Safety)
2.6. Environmental instructions
Protection of the environment is one of our most important duties.
Please take note of the instructions written in the following chapters:
•
Chapter 3.6. Storage and transport
•
Chapter 9.2. Disposal
5
Advertisement
Table of Contents
