Table of Contents
Advertisement
User's manual
The foot control that is highlighted in blue is the currently paired foot
control.
NOTE
For information on the different markings in the
press Questionmark.
6. While holding the handle down, start pairing by touching the name of the
selected foot control (black font) on the list.
A confirmation message is displayed on the dental unit's control panel.
7. Press OK to confirm the start of the pairing process.
8. Release the foot control handle.
Once the pairing is done, a message is displayed on the dental unit's
control panel and the paired foot control is highlighted in blue on the list.
If the pairing is not successful, you will receive a notification, after which
you can retry to perform the pairing.
9. Press OK to close the window.
25 Programming
Bind foot control window,
Planmeca Compact i
203
Advertisement
Table of Contents
