Table of Contents
Advertisement
22 Operating dental unit
22.7.1.2 Activating camera from dental unit
How to open Solanna Vision window on dental unit
Interface
Planmeca dental unit:
Control panel on instrument
console
Planmeca dental unit:
Control panel on Flexy-
holder
Planmeca dental unit: Foot
control
128
Planmeca Compact i
3. To activate the camera, click the Solanna Vision button.
NOTE
Alternatively, you can click the
Video streaming starts and the live stream can be viewed in the
Vision window in Planmeca Romexis. On the dental unit's control panel,
the Solanna Vision button indicates that video streaming is on.
NOTE
This does not open the
TIP
To switch full screen mode on/off, press the f key on the Planmeca
Romexis keyboard.
To switch low latency mode on/off, press the l key on the Planmeca
Romexis keyboard
Before activating the Planmeca Solanna Vision camera from the dental unit
you must do the following in Planmeca Romexis:
1. Select a patient to open the patient file.
2D module.
2. Select the
To activate the camera, open the
When the window opens, video streaming automatically starts.
NOTE
Solanna Vision window is open on the dental unit, the indicator
When the
lights on the operating light handles are blue and the operating light can not
be operated from the handle buttons. You can, however, use the operating
light hands-free with the gesture sensor, if the sensor is enabled.
Action
Press Solanna Vision in the main window to open the
Solanna Vision window.
Planmeca Compact i: The
to be opened by pressing the Flexy button, contact your Planmeca
dealer.
Planmeca Compact i: The
to be opened from one of the side knobs on the foot control, contact
your Planmeca dealer.
Solanna Vision button in the File module.
Solanna Vision window in the dental unit.
Solanna Vision window on the dental unit.
Solanna Vision window can be configured
Solanna Vision window can be configured
Solanna
User's manual
Advertisement
Table of Contents
