濾網 清 潔
1.將螺 絲 放鬆 旋 開 , 取出 濾網 清 理乾 淨
後, 再 鎖 緊 。
2.為延長 本 機 器 之 壽命 ,請 在每使 用 一 段
時間 後 卸下 , 清潔 乾淨。(圖42)
控 制 箱 規格 說 明(簡 易型)
1.規 格
(1)電 機 類 型 : 交 流 伺 服 電 機
(2)輸 入 電 壓 :AC 200V-240V
(3)輸 入 頻 率 :50Hz-60Hz
(4)電 機 輸 出 功 率 :400W
(5)電 機 輸 出 扭 力 :0.577N-m at 6000rpm
(6)電 機 最 大 輸 出 轉 速 :7500rpm
(7)電 機 最 小 輸 出 轉 速 :200rpm
(8)電 機 轉 速 爬 升 與 下 降 時 間 : 小 於
200ms
(9)照 明 燈 規 格 :DC12V/40mA (圖43)
FILTER CLEANING
1.Loosen the screw and take out the filter for
cleaning and the tighten it.
2.To extend the machine life, please clean the
filter regularly.( Fig.42)
CONTROL BOX SPECFICATION
(SIMPLE TYPE)
1.Description
(1)Motor : Alternating Current Servo Motor
(2)Input Voltage : AC 200V-240V
(3)Input Frequency : 50Hz-60Hz
(4)Output Power : 400W
(5)Output Torsion : 0.577N-m at 6000rpm
(6)Maximum RPM : 7500rpm
(7)Minimum RPM : 200rpm
(8)RPM Speed Time : Less Than 200ms
(9)Illumination : DC12V/40mA(Fig43)
-35-
Introduction
圖41/Fig. 41
圖42/Fig.42
P35