Table of Contents
Advertisement
2.針與 下勾 針 之關係
( 1)當下 勾針移 至最左 時， 勾 針尖端 與 針
中心距 約3.7 ~ 3.9mm（ 雙 針時 以 左 針
為主） 。(圖36)
(2)當 下勾 針 向 右 移 至 針 中 心 時 （ 雙 針 時
以左 針 為 主） ， 針與 勾 針 之 間 隙 為0 ~
0.05 mm。(圖37)
P32
2.The relationship between the needle and the
lower looper.
(1) When the lower looper moves to the
leftest point, the distance between the
looper tip and the middle line of the
needle should be about 3.7 ~ 3.9mm. For
double needles model, the distance is
from the lower looper tip to the middle
line of the left needle.( Fig.36)
(2)
When the lower lopper moves right to the
middle line of the needle (use the left
needle as standard when it's double
needle model), the clearance between
them should be 0 ~ 0.05mm.( Fig.37)
-32-
圖35/Fig.35
圖36/Fig.36
圖37/Fig.37
Advertisement
Table of Contents
