Filter Cleaning - Siruba 700Q Instruction Book

濾網 清 潔
1.將螺絲放鬆旋開，取出濾網清理乾淨
後，再鎖緊。
2.為延長本機器之壽命，請在每使用一段
時間後卸下，清潔乾淨。(圖42)
電眼 感 測器調整
1.調整電眼感測器與工作平台呈平行方
向，再鎖緊固定螺絲
2.打開縫紉機電源，此時電眼感測器之電
源指示燈 呈綠燈，且為恆亮狀態，若
此時檢測燈之橘燈 ，呈現滅的狀態，
則以一字起子 ，調整感測強度旋鈕
，直到檢測燈之橘燈
。
亮起。(圖43)
-35-

FILTER CLEANING

1.Loosen the screw and take out the filter for
cleaning
2.To extend the machine life, please clean the
filter frequently.( Fig.42)
ADJUST THE ELECTRIC
EYE SENSOR
1.Parallelize the electric eye sensor with the
work table and fasted the screw
2.Turn on the power and then the power light of
the sensor is green and eternal. If the
orange light is extinguished, adjust the
knob of the intensity sensor with a slotted
screwdriver until the orange light
lit.( Fig.43)
圖41/Fig. 41
圖42/Fig.42
.
is