Gpio(Digital Input/Output Settings); Camera Output Formats - JAI SW-4000T-10GE User Manual

GPIO (Digital Input / Output Settings)
The unit can input/output the following signals to and from external input/output connectors.
Line1 TTL Out 1
External
Line8 TTL Out 2
output
Line9 TTL Out 3
Line12 TTL Out 4
Line4 TTL In 1
External
Line5 Opt In 1
input
Line10 TTL In 2
Line13 TTL In 3
These signals can be used as triggers and other necessary signals within the camera or as
signals output from the camera to the system, such as those used for lighting equipment
control.
Signals are selected as follows.
• When using external signals or the signals of each GPIO module as trigger signals:
Select in [Trigger Selector] > [Trigger Source].
• When selecting the signals to use for external outputs:
Select in [Line Selector] > [Line Source].

Camera Output Formats

The SW-4000T-10GE supports five output formats.
RGB8,
RGB10V1Packed,
RGB10p32,
YUV422_8_UYVY,
YUV422_8
DC IN / TRIG IN connector (12 pin)
AUX connector (10 pin)
AUX connector (10 pin)
DC IN / TRIG IN connector (12 pin)
DC IN / TRIG IN connector (12 pin)
DC IN / TRIG IN connector (12 pin)
AUX connector (10 pin)
AUX connector (10 pin)
— 23 —
SW-4000T-10GE