Connectors And Pin Assignment; Digital Video Output (75Ω 1.0・2.3 Din Receptacle); 12-Pin Connector - JAI SP-5000M-CXP4 User Manual

SP-5000M-CXP4 / SP-5000C-CXP4
5.2

Connectors and pin assignment

5.2.1 Digital Video Output (75Ω 1.0・2.3 DIN Receptacle)
Type: CoaXPress Connector (ACX1785-ND Amphenol Connector or equivalent)
The SP-5000-CXP4 has three connecting systems described in 5.1.2.
They are one lane, two lanes and four lanes connecting systems.
If a one lane system is used, CXP#1 must be used. If two lanes are used, CXP#1 and CXP#2 should
be used.
CXP#1
CXP#2
CXP#3
CXP#4
Maximum Bit Rate per one coax: 6.25 Gbps
Maximun Bit Rate per two cables: 12.5 Gbps
Maximum Bit Rate per four coax: 25.0 Gbps
5.2.2

12-Pin connector

Type: HR-10A-10R-12PB(72) Hirose male or equivalent.
Fig.4 12-pin connector
Table – 4
Pin no.
1
2
3
4
5
6
7
8
9
10
11
12
*1) Factory default setting is an Exposure Active signal with negative polarity.
*2) Factory default setting is a trigger input
Electrical specifications for input /output
Line 1 TTL output
Line 4 TTL input
Line 2 Opt. input
Line 5 Opt. output
PoCXP compliant
Hirose 12P pin assignment
Signal Remarks
GND
DC input
+12V to +24V
GND
NC
Opto in- Line5
Opto in+ Line5
Opto out- Line2
Opto out+ Line2
TTL out Line 1 (Note*1)
TTL in Line 4 (Note*2)
DC input +12V to +24V
GND
High level: 3V to 4.5V, Low level: less 1V, Output resistance: 75 Ω
High level: 2V to 5V, Low level: less 1V, Input resistance: 1.5K Ω
3.3V to 24V
3.3V to 24V. 30mA(Max.)
- 13 -