JAI SW-4000T-10GE User Manual page 54

Item
o） Transport Layer Control
PlayloadSize (B)
GevSupportedOptionSelector
GevSupportedOption
GevInterfaceSelector
GevMACAddress
GevPAUSEFrameReception
GevPAUSEFrameTransmission
GevCurrentIPConfigurationLLA
GevCurrentIPConfigurationDHCP
GevCurrentIPConfigurationPersistentIP
GevCurrentIPAddress
GevCurrentSubnetMask
GevCurrentDefaultGateway
GevIPConfigurationStatus
GevPersistentIPAddress
GevPersistentSubnetMask
GevPersistentDefaultGateway
Gev IEEE 1588 Clock Accuracy
Gev IEEE Status
GevGVCPExtendedStatusCodesSelector
GevGVCPExtendedStatusCodes
GevGVCPPendingAck
GevGVSPExtendedIDMode
GevCCP
GevPrimaryApplicationSocket
GevPrimaryApplicationIPAddress
GevMCPHostPort
GevMCDA
GevMCSP
GevStreamChannelSelector
Setting range Default value
ー 12288
SingleLink, MultiLink, StaticLAG, DynamicLAG,
PAUSEFrameReception, PAUSEFrameGeneration,
IPConfigurationLLA, IPConfigurationDHCP,
IPConfigurationPersistentIP, StreamChannelSourceSocket,
StandardIDMode, MessageChannelSourceSocket,
CommandsConcatenation, WriteMem, PacketResend, Event,
EventData, PendingAck, IEEE1588, Action, UnconditionalAction,
ScheduledAction, PrimaryApplicationSwitchover,
ExtendedStatusCodes, ExtendedStatusCodesVersion2_0,
DiscoveryAckDelay, DiscoveryAckDelayWritable,
TestData, ManifestTable, CCPApplicationSocket, LinkSpeed,
HeartbeatDisable, SerialNumber, UserDefinedName,
StreamChannel BigAndLittleEndian,
StreamChannel IP Reassembly,
StreamChannel Multi Zone,
StreamChannel PacketResendDestination,
StreamChannel AllInTransmission,
StreamChannel UnconditionalStreaming,
StreamChannel ExtendedChunkData
True, False ー
0 0
ー ー
True, False False
True, False False
True True
True, False True
True, False True
ー ー
ー ー
ー ー
None, PersistentIP, DHCP, ー
LLA, ForceIP
ー ー
ー ー
ー ー
Within25ns, Within100ns, Unknown
Within250ns, Within1us,
Within2p5u, Within10us,
Within25us, Within100us,
Within250us, Within1ms,
Within2p5ms, Within10ms,
Within25ms, Within100ms,
Within250ms, Within1s,
Within10s,
GreaterThan10s,
AlternatePTPProfile,
Unknown,
Reserved
Initializing, Faulty ー
Disabled, Listening
PreMaster, Master
Passive, Uncalibrated
Slave
Version 1 1, Version 1 1
Version 2 0
True, False ー
True, False ー
Off, On Off
OpenAccess, OpenAccess
ExclusiveAccess,
ControlAccess,
ControlAccessSwitchoverActiv
e
ー ー
ー ー
ー ー
ー ー
ー ー
ー 0
— 54 —
Description
Display information on transport layer control.
Display the payload size.
Select the supported options for GigEVision.
Display whether support for the function selected in
GevSupportedOptionSelector is enabled or disabled.
The value for this item is fixed at 0.
Display the MAC address.
Controls whether incoming PAUSE Frames are handled on the given logical link.
Controls whether PAUSE Frames can be generated on the given logical link.
Display whether the current IP configuration is calibrated by LLA (link-local address). (fixed at
[True])
Select whether to set the IP configuration to DHCP.
Select whether to set the IP configuration to Persistent IP.
Display the IP address.
Display the subnet.
Display the default gateway.
Display the current IP configuration status. None, PersistentIP, DHCP, LLA,
ForceIP
Set the persistent IP address.
Set the persistent subnet mask.
Set the persistent default gateway.
Indicates the expected accuracy of the device clock when it is the
grandmaster, or in the event it becomes the grandmaster.
Display the status of IEEE 1588 clock.
Selects the GigE Vision version to control extended status codes for.
Enables the generation of extended status codes.
Enables the generation of PENDING_ACK.
Enables the extended IDs mode.
Controls the device access privilege of an application.
Returns the UDP source port of the primary application.
Returns the address of the primary application.
Controls the port to which the device must send messages. Setting this value
to 0 closes the message channel.
Controls the destination IP address for the message channel.
This feature indicates the source port for the message channel.
Selects the stream channel to control.
SW-4000T-10GE