Step 2:Connecting Devices - JAI SW-4000T-10GE User Manual

Step 2: Connecting Devices
Camera body
①Lens
② Direct connection
① Lens
・Attach an M52-mount lens or F-mount lens.
Caution
The maximum performance of the camera may not be realized depending on the lens.
Note
The following formula can be used to estimate the focal length.
focal length = WD/(1 + W/w)
WD: Working distance (distance between lens and object)
W : Width of object
w : Width of sensor 30.72 mm on this camera.
② Direct connection
When mounting the camera directly to another device, for example, use screws that match the
camera locking screw holes on the camera. (M4, 6 mm depth)
Caution
For heavy lenses, be sure to support the lens itself. Do not use configurations in which its weight
is supported by the camera.
③ LAN cable
⑤ DC IN/trigger IN
connection cable
(or direct connection)
④ Network card
or
⑥ AC adapter (not supplied)
— 12 —
SW-4000T-10GE
Switching hub