Table of Contents
Advertisement
② POWER/TRIG LED
Indicates the power and trigger input status.
LED status and camera status
LED
POWER/TRIG LED
③ RJ-45 connector
The camera supports the following Ethernet standards.
(1000Base-T, 2.5GBase-T, 5GBase-T, 10GBase-T)
Depending on the Ethernet standard to be used, the cable type and the maximum cable
length are limited.
For details, refer to "Step 2 Connecting Devices".
⑤
④ LINK LED
Indicates the link status of the network.
LED
LINK
⑤ ACT LED
Indicates the network communication status.
LED
ACT
Light
(Lit amber)
Camera initializing.
(Lit green)
Camera in operation.
(Blinking green)
During operation in trigger mode, trigger signals are
being input
* The blinking interval is not related to the actual input interval of the external
trigger.
④
Light
Network Link is not established.
(Lights off)
(Blinking green
1000Base-T Link is established.
slowly)
(Interval 1sec)
(Blinking green
2.5GBase-T Link or 5GBase-T Link is established.
quickly）
(Interval 200 msec)
(Lit green）
10GBase-T Link is established.
Light
(Lights off)
No network communication
(Tx) Network communication in progress.
(Blinking green)
(Blinking yellow)
(Rx) Network communication in progress.
— 8 —
Status
Status
Status
SW-4000T-10GE
Advertisement
Table of Contents
