Main Functions; Gpio (Digital Input/Output Settings); Valid Input/Output Combinations - JAI GO-2401M-PGE User Manual

Main Functions

GPIO (Digital Input/Output Settings)

The camera is equipped with GPIO (general-purpose input/output) functions for generating and using
combinations of triggers and other necessary signals within the camera and of signals output from the
camera to the system such as those used for lighting equipment control.

Valid Input/Output Combinations

The following signals can be used as sources for each output destination (Trigger Selector, Line
Selector, Pulse Generator Selector).
You can also connect two different sources to NAND paths in the GPIO and reuse the signal generated
there as a source for a different selector.
The combinations of source signals and output destinations are indicated in the following.
(Cross point
switch output)
Source signal
(Cross point
switch input)
LOW
HIGH
Line5 OPT 1 In
NAND 0 Out
NAND 1 Out
Pulse Generator 0
User Output 0
User Output 1
Software Trigger
Action 1
Action 2
FVAL
LVAL
Exposure Active
Frame Trigger Wait
Frame Active
Acquisition Trigger Wait
: Indicates default values for each selector. "Factory default values" (page 17) shows the
default values for [Frame Start].
Selector
Trigger Selector
   
   
   
   
   
   
   
   
   
   
   
× × × ×
× × × ×
× × × ×
× × × ×
× × × ×
× × × ×
Trigger Source
— 25 —
Output destination
Line Selector
     
     
     
× ×
   
×
    
     
     
     
× × × × ×

× × × × × ×
× × × × × ×
     
× × × × ×

     
     
     
     
Line Source
Use
GO-2401M-PGE / GO-2401C-PGE
Pulse
Generator
Selector
 
 
 
 
×

×

 
 
× ×
×

×

 
×

 
 
 
 
Pulse
Generator
Clear Source