JAI SW-4000T-10GE User Manual page 50

Item
j） Logic Block Control
Logic Block Selector Logic Block 0,
Logic Block 1
Logic Block Function AND
Logic Block Input Selector 0, 1
Logic Block Input Source Exposure Active,
LVAL,
Pulse Generator 0,
Pulse Generator 1,
Pulse Generator 2,
Pulse Generator 3,
User Output 0,
User Output 1,
User Output 2,
User Output 3,
Line4 TTL In 1,
Line5 Opt IN 1,
Line10 TTL In 2,
Line13 TTL In 3,
Logic Block 0,
Logic Block 1,
Encoder Trigger
Logic Block Input Inverter True, False
Logic Block Output Inverter True
Item
k） Action Control
Action Device Key 0x00000000〜
Action Queue Size ー
Action Selector 0,1,2,3
Action Group Mask
Action Group Key 0x00000000〜
Setting range Default value
Logic Block 0
AND
0
Line4 TTL In 1
True
Setting range Default value
ー
0xFFFFFFFF
256 (Fixed)
0
0x00000000〜 ー
0xFFFFFFFF
ー
0xFFFFFFFF
— 50 —
Description
Specifies the Logic Block to configure.
Selects the combinational logic Function of the Logic Block to configure.
Selects the Logic Block's input to configure.
Selects the source signal for the input into the Logic Block.
Selects if the selected Logic Block Input source signal is inverted.
Selects if the selected Logic Block Output signal is inverted. (True fixed)
Description
Configure settings for action control.
An action command is executed if this ActionDeviceKey matches the
DeviceKey contained in the action command message.
Indicates the size of the scheduled action commands.
Select the ActionSelector.
An action command is executed if the result of an AND operation of
GroupMask contained in this ActionGroupMask and an action command
message is not 0.
An action command is executed if this ActionGroupKey matches the
GroupKey contained in the action command message.
SW-4000T-10GE