JAI SW-4000T-10GE User Manual page 46

Item
d） Analog Control
IndividualGainMode Off, On
GainSelector IndividualGainMode : On
IndidualGainMode : Off
Gain IndividualGainMode : On
IndidualGainMode : Off
Analog Gain Selector Analog Red,
Analog Green,
Analog Blue
AnalogBaseGain 0dB, 6dB, 12dB
BlackLevelSelector DigitalAll,
DigitalRed,
DigitalBlue
BlackLevel DigitalAll, -133〜255
DigitalRed, -64〜 64
DigitalBlue -64〜 64
Balance White Auto Off,
Once,
Preset5000K,
Preset6500K,
Preset7500K
Balance White Auto Width 16〜4096 step 16
Balance White Auto OffsetX 0 〜 4080 step 16
Balance White Auto Result
Gamma 0.45, 0.5, 0.55, 0.6, 0.65,
0.75, 0.8, 0.9, 1.0
LUTMode Off, Gamma, LUT
SensorType TypeA, TypeB
Setting range Default value
Off
ー
DigitalGreen,
DigitalRed,
DigitalBlue
DigitalAll,
DigitalRed,
DigitalBlue
x1.0
DigitalGreen
x1.0 〜 x16.0
DigitalRed
x1.0 〜 x16.0
DigitalBlue
x1.0 〜 x16.0
DigitalAll
x1.0 〜 x8.0
DigitalRed
x0.4 〜 x4.0
DigitalBlue
x0.4 〜 x4.0
Analog Red
0dB
DigitalAll
DigitalAll, 0
DigitalRed, 0
DigitalBlue 0
Off
4096
0
0
0.45
Off
TypeA
— 46 —
Description
Set whether to enable auto exposure.
In IndividualGainMode, RGB can be configured individually for the entire gain
adjustment range of the sensor.
Select the gain to configure.
Set the gain value for the gain setting selected in [GainSelector].
Select the analog gain to configure.
Set the gain value for the analog gain setting selected in [Analog Gain
Selector].
Select the black level to configure.
Set the black level value.
Enable/disable auto white balance.
Set the area for adjusting white balance.
Set the area for adjusting white balance.
Display the result for adjusting white balance.
0:Idle
1:Succeeded
2:Error1 - G image was too bright
3:Error2 - G image was too dark
4:Error3 - Timeout
Set the gamma value.
Select the LUT mode.
Select the size of pixel.
TypeA : 7.5um x 7.5um
TypeB : 7.5um x 10.5um
SW-4000T-10GE