Interior View Of D1H Drive - Danfoss VLT AutomationDrive FC 302 Operating Manual

Product Overview

3.3 Interior View of D1h Drive

Illustration 3.1 shows the D1h components relevant to installation and commissioning. The D1h drive interior is similar to
that of the D3h, D5h, and D6h drives. Drives with the contactor option also contain a contactor terminal block (TB6). For the
location of TB6, see chapter 5.8 Terminal Dimensions.
1
2
3
4
1 LCP (local control panel)
2 Control terminals
3 Mains input terminals 91 (L1), 92 (L2), 93 (L3)
4 Ground terminals for IP21/54 (Type 1/12)
5 Lifting ring
Illustration 3.1 Interior View of D1h Drive (similar to D3h/D5h/D6h)
MG34U502
Operating Guide
6 Mounting holes
7 Relays 1 and 2
8 Motor output terminals 96 (U), 97 (V), 98 (W)
9 Cable clamps
10 Ground terminals for IP20 (Chassis)
Danfoss A/S © 09/2018 All rights reserved.
3 3
5
6
7
8
9
10
9