Powering Up Your Di-106 Or Di-106M - D-Link DI-106 Series User Manual

from the LAN because of excessive collisions (partitioning is a
required capability of all Ethernet hubs).
PHONE – 1—Lights up when standard phone port 1 is in use.
PHONE – 2—Lights up when standard phone port 2 is in use..

Powering Up Your DI-106 or DI-106M

When you power up your DI-106 or DI-106M, the router will
perform several internal tests and do an ISDN line initialization.
After ISDN line initialization, the router will ask you to press
ENTER to continue.
When you press ENTER, the router will display a login screen and
ask you to enter the password, as shown below:
Enter the default password, 1234, to get into the main menu of the
System Management Terminal (SMT). Note that once you are in
the SMT, if there is no activity for more than 5 minutes, the router
Installation 31