General Setup - D-Link DI-106 Series User Manual

# Menu Title
12 Static Routing Setup
13 Default Dial-in Setup
14 Dial-in User Setup
21 Filter Set Configuration
22 SNMP Configuration
23 System Security
24 System Maintenance
99 Exit

General Setup

This menu contains administrative and system-related information.
Enter 1 in the main menu to go to menu 1, General Setup.
34
Description
including Internet connection. A DI-106 or DI-106M can
have up to four Remote Nodes.
Set up static routes for different protocols. Up to four static
routes can be set for each protocol.
Set up default dial-in parameters such that your DI-106 or
DI-106M can be a dial-in server for the Remote Node and
Remote Dial-in User.
Set up Remote Dial-in User. Your DI-106 or DI-106M
can directly support up to eight Remote Dial-in Users.
Set up filters to be used in menu 3 and menu 11 to provide
security, call control, etc.
Set up SNMP-related parameters (DI-106M only)
Set up security related parameters
Provide system status, diagnostics, firmware upload, etc.
To exit from SMT and return to the blank screen
Installation