D-Link DI-106 Series User Manual page 131

The fields in the System Security – External Server menu are as
follows:
1. Active—Determines whether the external security facility is
enabled. If this field contains No, only the built-in dial-up user
list will be used. If this field contains Yes, the built-in dial-up
user list will be searched first, then the external authentication
server.
2. Type—Determines the type of the external authentication
server. At present only the RADIUS type is supported.
3. Server Address—The IP address of your network's UNIX-
based RADIUS server.
4. Port #—The IP port address used by the authentication server.
The default value of 1645 should be used.
5. Key—A "password" used to identify the DI-106M as a valid
client of the RADIUS authentication service.
The Key password should be stored in the client file in the
RADIUS server's /etc/raddb directory. Lines of the form
# Client Name
#-----------------------------
192.168.0.1
should be added to the client file. The Client Name field in the
file gives the IP address of the DI-106M, and the Key field should
be the same as the Key field in menu 23.2.
After a RADIUS server has been configured, the DI-106M will use
it to authenticate all users that it can't find in its internal Dial-Up
User List (menu 14).
System Security
Key
1234
123