D-Link DI-106 Series User Manual page 125

1. From the main menu, select option 22, SNMP Configuration.
This will bring you to menu 22, SNMP Configuration, shown
above.
2. You will then be prompted to enter the following information.
Steps 3 -7 will describe the specific parameters involved in the
configuration. The parameters you will have to fill in will be
indicated in bold type.
3. Get Community—From this field, you can determine what the
"Get" community is for your DI-106M. The value entered into
this field will be used to authenticate the community field for
incoming "Get" and "GetNext" requests from the management
station. The default is public.
4. Set Community—In this field, enter the "Set" community for
your DI-106M. The value entered in this field will be used to
authenticate the community field for incoming "Set" requests
from the management station. The default is public.
5. Trusted Host—Enter the IP address of the Trusted Host SNMP
management station. If this field is configured, the DI-106M will
SNMP 117