Call Control Parameters - D-Link DI-106 Series User Manual

Call Control Parameters

Dialer Timeout: Digital Call (sec)—The DI-106 or DI-106
will "time out" (give up) if it can not set up an outgoing
digital call within the timeout value. The default is 30.
Retry Counter—How many times a busy or no-answer
phone number is retried before it is put on the blacklist. The
default is 0 and the blacklist control is not enabled.
Retry Interval (sec)—Elapsed time after a call fails before
another call may be retried. Applies before a phone number is
blacklisted.
System Maintenance 141