D-Link DI-106 Series User Manual page 90

1. Rem IP Address—This will show the IP address you entered
for this Remote Node in the previous menu.
2. Rem IP Subnet Mask—Enter the subnet mask for the remote
network.
3. My WAN Addr—Some implementations, especially the UNIX
derivatives, require hosts on both ends of the ISDN link to have
separate addresses from the LAN, and that the addresses must
have the same network number. If this is the case, enter the IP
address assigned to the WAN port of your DI-106 or DI-106M.
Note that this is the address assigned to the local DI-106 or
DI-106M, not the remote router.
1. Single User Account—This field should be set to yes to enable
the Single User Account (Network Address Translator) feature
for this site. Use the space bar to toggle between yes and no.
See page 52 for more information on the Single User Account
feature.
2. Server IP address—If you are using the Single User Account
feature and you want to make a server accessible on your LAN,
e.g., a web server, accessible to outside users, enter that servers
IP address here.
82 TCP/IP Configuration