Table of Contents
Advertisement
The network number must be unique and not used anywhere else
on the entire internetwork.
IPX Spoofing
The DI-106M comes with several pre-defined call filters
designed to prevent certain IPX packets from triggering a call to
a Remote Node. These filters should inform your DI-106M
which packets should be ignored as traffic.
When you are routing IPX packets, the default call filters are
defined as follows:
Block periodical SAP and RIP response messages.
Block NetWare serialization packets.
Allow SAP and RIP inquiry packets.
These call filters prevent the DI-106M from making a call to the
Remote Node, thus preventing the expense of an unnecessary
phone call.
IPX Ethernet Setup
The first step is to set up the DI-106M on the LAN. From menu
3, select option 3 to go to menu 3.3, Novell IPX Ethernet Setup.
This menu is shown below:
Novell IPX Configuration
89
Advertisement
Table of Contents
